JP CARLTON HURRICANE RS SERIES STUMP GRINDER

J.P. Carlton’s Hurricane RS inherits many of the performance features of the larger TRX with an emphasis on Residential Service. The Hurricane RS is shorter, narrow, lower, and lighter than the land clearing TRX yet rivals it in production.

The Hurricane RS Stump Cutter shares J.P. Carlton’s patented turret bearing design with the Hurricane TRX giving it 360-degree continuous rotation and massive cutting dimensions. The Hurricane RS is capable of cutting a full 18-foot width, 70 inches high and over 2 feet deep.

A Caterpillar track system is utilized on the Hurricane RS. This proven Caterpillar track undercarriage minimizes ground pressure and provides plenty of both climbing power and speed with its two-speed design. The rubber tracks used on the Hurricane RS stump grinder are designed to help minimize turf damage.

The proportional wireless remote control, included as standard on every Hurricane RS, gives the operator precise control from up to 1,500 feet. This powerful remote allows the operator to control the machine from auxiliary equipment. This remote features feather touch controls that allow the operator to control the speed of every function right from his fingertips. This remote minimizes operator fatigue, maximizing operator efficiency over a long day.

The J.P. Carlton Hurricane RS delivers high production capacity in a Residential Service machine.

140-Horsepower Turbo Charged John Deere Diesel Engine provides maximum cutting power.
Large Cutter Wheel, 31-inch diameter & 11/2-inch thick, provides maximum cutting power and flywheel momentum.
Caterpillar Track Undercarriage provides a proven durable platform.
Tapered Roller Bearings in jack shaft and cutter wheel provide long service life and reduced maintenance.

SPECS:

Engine options: 140 Horsepower Turbo Charged John Deere Diesel

Cutting depth below ground: 25″

Cutting height above ground: 70″

Cutter head swing: 18 feet diameter continuous rotation

Number of teeth on cutter wheel: 48

Cutter wheel diameter w/teeth: 31″

Cutter wheel thickness: 1 1/2″ Blanchard ground

Jack shaft bearings: 2 7/16″ Tapered Roller

Cutter wheel bearings: 2 15/16″ Tapered Roller

Head lift bearings: 3 15/16″

Fuel tank capacity: 36 gallons

Hydraulic tank capacity: 31 gallons

Track width: 12″

Track length: 81″

Ground pressure: 4.4 psi

Machine width: 65″

Machine height: 83″

Overall length: 170″

Total weight: 10,200 lbs.

Paint: Dupont Imron with Epoxy Primer