With its power and easily transportable design, this compact and economical chipper is the ideal unit for utility line clearing, residential tree services, rental yards and municipalities. The Eeger Beever 1418’s 18″ (45.7 cm) diameter single top feed wheel with straight flow-through infeed design easily climbs over material, reduces drag and increases chipping efficiency, allowing it to overcome the limitations of comparable disc chippers.
37″ diameter x 2″ (93.98 cm x 5.08 cm) thick chipper disc material, ultrasonically tested and certified free of material defects, has four full-length, removable paddles for maximum chip throwing velocity.
Folding infeed tray with single (top) feed wheel and straight, flow through infeed design for more efficient material feed.
TorqMaxTM Top Feed Wheel Compression system with spring assisted down pressure generates more than 3,200 lb/ft (4,338 Nm) of material pulling force.
Height: 8’2″ (2.49 m)
Width: 5’10” (1.78 m)
Length (transport): 16’7″ (5.05 m)
Length (operating): 17’3″ (5.26 m)
Gross weight (approximate): 5,350 lb (2,426 kg)
Suspension: 7,000 lb Torflex (3,175 kg)
Infeed opening: 33″ high x 60″ wide (83.8 cm x 152.4 cm)
Throat opening: 14″ high x 18″ wide (35.6 cm x 45.7 cm)
Disc dimensions: 2″ thick x 37″ diameter (5.1 cm x 94 cm)
Engine: CAT, Perkins, or PSI
Horsepower: 49–145 HP (36.5—108.1 kW)
Fuel capacity: 24.5 gallons
Hydraulic oil capacity: 9 gallons
Frame: 8.2 lb, 6″ (3.7 kg, 15.2 cm) channel
Tires: (2) 235/80Rx16
Hitch: 2.5″ Pintle (6.35 cm)
Chipper disc with four staggered .5″ x 5″ x 7.25″ (1.27 cm x 12.7 cm x 18.41 cm) dual-edged knives and four full-length, bolt-on chip throwing paddles
Quarter disc hood access for disc maintenance and eases serviceability.
360° manual rotation discharge with adjustable chip deflector
Enclosed engine with gauge panel, radiator fines screen and slide rails for belt adjustment
Fuel tank sight gauge, drain plug and shutoff valve
Nine-gallon lockable hydraulic reservoir with sight gauge and clean-out door
Tube and support pad to mechanically raise and lower feed wheel using the draw bar jack
ChipSafe® Operator Safety Shield
Reversing automatic feed system with hydraulic lift assist
Winch package: heavy-duty, 5,000 lb (2,268 kg) pull capacity with rope and 10′ chafe guard
Custom paint and logo packages
Bottom Bump Bar
Manual Crank Discharge
Axle Options Available
This product hasn't received any reviews yet. Be the first to review this product!