Ideal for residential tree services, utility line clearing, vegetation management, maintenance contractors and municipalities, this high-capacity, high-production chipper includes more standard features than any other chipper in its class. Many customer-inspired innovations are featured on the Eeger Beever 1821-SA, increasing efficiency and safety while reducing operating and maintenance costs. The 1821-SA is also available tracked for right of way clearing, highway clean-ups and hard-to-reach areas requiring a self-propelled unit for material access.
30″ (76.2 cm) diameter four-knife staggered knife-pocket drum with patented removable knife holders provides maximum chipping efficiency.
The 8.2 lb., 6″ (3.7 kg, 15.2 cm) channel frame rails increase structural strength while maintaining low unit weight.
The reversing auto-feed system automatically stops forward feed and briefly backs material away from the drum for optimum engine performance while chipping.
Hydraulic Down Pressure
The Variable Force™ Hydraulic Down Pressure System eliminates the use of springs and creates up to 4,500 lb (2,040 kg) of perpetual down pressure.
Height: 8’11” wheeled (2.72 m)/ 8’6″ tracked (2.59 m)
Width: 7’3″ wheeled (2.21 m)/ 7’10” tracked (2.39 m)
Length: 18’1″ wheeled (5.51 m)/ 16′ tracked (4.88 m)
13,500 lb tracked (6,125 kg)
Suspension: 9,000 lb Torflex (4,082 kg)
Infeed opening: 41″ high x 59″ wide (104.1 cm x 149.9 cm)
Throat opening: 18″ high x 20.5″ wide (45.7 cm x 52.1 cm)
Drum: 23.75″ wide x 30″ diameter (60.32 cm x 76.2 cm)
Engine: CAT, Perkins, or PSI
Horsepower: 147–174 HP (109.6—129.8 kW)
Fuel capacity: 32 gallons
Hydraulic oil capacity: 26 gallons tracked
Frame: 8.2 lb. 6″ channel wheeled (3.72 kg., 15.24 cm channel)/ 6″ x 2″ x .25″ wall tube (15.24 cm x 5.08 cm x 6.35 mm)
400 mm rubber track undercarriage
Hitch: 2.5″ Pintle (6.35 cm)
Dual horizontal feed wheels with TorqMax top feed wheel compression system, hydraulic lift assist, Variable Force constant hydraulic down pressure system with additional manually applied hydraulic down pressure at the valve handle and direct drive bottom feed wheel with torque arm couples.
Live hydraulic system including: ball valve, pump, motor, and valve bank with additional pre-plumbed valve section for installation of an aftermarket winch package
3″ x 5″ (7.62 cm x 12.7 cm) tubular steel telescoping draw bar with two 12″ (30.48 cm) extensions
ChipSafe® Operator Safety Shield
Winch package: heavy-duty, 5,000 lb (2,268 kg) pull capacity with rope and 10′ chafe guard
Custom Paint and Logo Packages
Bottom Bump Bar
Hydraulic Swivel Discharge
Spare Tire and Mount
Folding Infeed Tray
Chocks and Chock Holder
Front and Rear Stabilizers
SPECIFICATIONS MAY VARY WITH EQUIPMENT OPTIONS.
This product hasn't received any reviews yet. Be the first to review this product!